We have many species of hardwood slabs to choose from. Some of which are Sycamores, Maples, Oaks, Walnuts, Elms, Cherry .Thickness ranges from 1" inch to 2 inches. Our band saw can cut widths up to 48 inches and lengths up to 30 feet.
Wood slabs are ideal for counter tops, bar tops, tabletops, benches and more! We can supply you with the slab(s) for self fabrication, or we can deal directly with your general contractor who will fabricate one for you.
WALNUT
LENGTH -NOT EXACT PRICING!
W
I
D
T
H
USE CHART ABOVE TO DETERMINE ROUGH PRICE BASED ON SPECIES
MULTIPLY PRICE OF SLAB FROM CHART BASED ON SPECIES BELOW
PINE - 1.35 x (price of slab) = TOTAL
OAK - 2.00
SPALTED MAPLE - 2.85
HEAVILY SPALTED MAPLE - 3.00
Guanacaste - 3.85
MULTIPLY PRICE OF SLAB FROM CHART BASED ON SPECIES BELOW
ELM - 2.2 x (price of slab) = TOTAL
BLACK WALNUT - 3.5
WORMY MAPLE - 2.75
SYCAMORE - 2.85
Formula Example based on a Oak slab 32" wide and 7' long (price on chart $547.50)
$547.50 x 2.00 = $1095.00 total for oak slab
BOOK-MATCHING
5' = $280 8' = $400
6' = $320 9' = $420
7' = $370 10'= $450
LENGTHS
PLANING CHARGE
12" - 16" = $40
17" - 20" = $50
21" - 24" = $60
25" - 28" = $70
29" - 32" = $80
33" - 36" = $95
WIDTH
PLANING & SANDING
Up to 34" wide = $55/SF
35" to 36" wide = $65/SF
Over 36" wide = $75/SF
We recommend Gorilla Glue™ for book matching slabs. In Stock. 36 oz Bottle - $26.00
PRICES ARE SUBJECT TO CHANGE DEPENDING ON CHARACTER OF SLAB . USE TABLE ON LEFT TO GET A ROUGH ESTIMATE
ON PRICING FOR A SLAB. LIMITED AVAILABILITY.
Wood slabs that are fabricated by Boards and Beams and are sold to customers for their installation do not come with warranty for twisting and cupping. Slabs need proper fastening and support and a adequate counter or table base.
(Below is a guideline on the cost to fabricate a slab top only)
Anything Wider then 30"
Please Call for Pricing and Availability -
Pricing will be 2x-3x the price for Walnut.
THIS IS A PRICING GUIDELINE. EACH SLAB IS PRICED BY SPECIES, SIZE, AND CHARACTER GRADE.PRICES WILL VARY DEPENDING ON RARITY OF SIZE
Pricing can be a lot more than shown on chart.
RIPPING & CROSS CUT
CHARGES
Ripping 1 straight edge - $85
Cross cut to length - $40
IMPORTANT SLAB NOTES: SLABS ARE AIR DRIED AND SOLD “AS IS”. WE ARE NOT RESPONSIBLE FOR ANY SPLITTING, CHECKING, CRACKING, WARPING, TWISTING OR ANY MOVEMENT. WE RECOMMEND THAT YOU SECURE THE SLAB TO THE BASE YOU ARE USING AS SOON AS POSSIBLE. THIS WILL HELP MINIMIZE ANY MOVEMENTS. SLABS ARE AIR DRIED AND NOT KILN DRIED - BOARDS AND BEAMS IS NOT RESPONSIBLE FOR ANY INSECTS THAT MAY RESIDE IN THE SLABS.